The Aviation Centre - Moorabbin

ituated on the bustling Moorabbin airport, The Aviation Centres' Moorabbin branch is right in the middle of what is considered to be one of the busiest airports in the Southern Hemisphere. We are conveniently located close to many major aviation service and parts providers such as:

• Aircraft component services
  
• Aircraft props and spares
• Airflite
  
• Aviall
  
• Aviaquip 
• Flight Avionics (Shared hangar)
  
  

Ensuring we can source and receive parts faster subject to supplier availability.

Our Moorabbin branch is equipped to provide the following services maintaining not only your aircraft, but also a speedy turn around time:

• Engine/Airframe 100 hourly/Annual inspections
• Basic repairs/modifications
  
• Corrosion inhibiting treatment
  
• Corrosion treatment and removal

The Aviation Centre Moorabbin services three major flying schools based at Moorabbin and  Bacchus Marsh:

• TVSA
• Moorabbin flying services
• Melbourne flight training...
  

As well as maintaining an Embraer Bandeirante for King Island Airlines and a Cessna Citation S550.

No matter what size, type, age or category your aeroplane is, The Aviation Centre Moorabbin can maintain it professionally, cost effectively and quickly.

 

Engine/Airframe 100 hourly/Annual inspections

hatever your aircraft make or model, whether it be fabric covered of full metal construction, fixed wing or rotary, your aircraft will be inspected and serviced personally by experienced technicians who are highly knowledgeable in their field.  Care will be taken to ensure your aircraft is not only safe when it leaves our hangar, but will remain safe long after services. 

Basic Repairs or Modifications

he Aviation Centre Moorabbin is able to perform minor repairs and modifications, such as simple patch skin repairs, baffle repairs and manufacture of smaller replacement parts.  After manufacture of your repair/modification we have the facilities to ensure your parts are fully protected against the elements by applying Alodine(R) and a coat of paint.  Larger tasks may be referred to our Tyabb branch for heavy maintenance.  

Corrosion Inhibiting Treatment

orrosion is considered the number one enemy of aircraft around the world.  The costs of removing, treating, repainting and sometimes even repair or replacement of parts due to corrosion can quickly become very expensive if not found and rectified in its early stages. But of course the best cure for almost anything is prevention.

To protect your aircraft from corrosion formation as much as possible, contact The Aviation Centre and let us spray the internal structure of your aeroplane with an approved Anti Corrosion Formula (We recommend ACF-50) which can remain active for 24 months.  To view more information on ACF-50 you can visit Corrosion Control

Corrosion Treatment and Removal

• Worm like lines or bubbles starting to form under your paint?  
• White powdery substances developing on external, or worse, internal structure?  

 

Have it professionally removed by our trained staff before it becomes a dangerous and not to mention costly situation. 

We can remove harmful corrosion in situ or on removed components depending on what the situation demands.  After corrosion removal, the surface will be treated to ensure all of the corrosion has been neutralised before being given a protective chemical treatment (Alodine®) and finally painted.

Do not delay removing corrosion, as active corrosion does not go away, it will only get worse leading to greater material loss, greater costs (including possible replacement of damaged parts) and greater danger of parts becoming weak and potentially failing.

Contact us

If you have any further enquiries regarding any of the above services, please contact us.